Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Murano
    4. : Checks and maintenance

Nissan Murano - Checks and maintenance

Nissan Murano (2008-2014 / Z51, MK 2)
How to open the front hood of a Nissan Murano
How to open the front hood of a Nissan Murano? We see the opening and closing of the hood. We pull the lever located at the bottom left of the steering wheel, …read all…
Posted on 16 December 2023 by ScegliAuto
Cigarette Lighter (1) Car stereo (4) Spark plugs (2) Key (4) -board computer (1) Checks and maintenance (1) Dashboard (1) Headlight (2) Cabin air filter (3) Accessory Kit (2) Rear light bulb (1) Handle (2) Starter motor (1) Gear oil (1) Door panel (1) Brake pads (2) Fuel pump (1) Instrument cluster (2) Fuse box (3)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos