Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the OBD2 port of the Nissan Murano 2?

Model: Nissan Murano Z51, MK 2 - Years 2008-2014
Part: Checks and maintenance

If you don't know where the OBD2 port is located in your second-generation Nissan Murano, don't worry because the following guide provides a description of all the steps to follow. First, reach the driver's seat and make sure the car is off, or proceed to turn it off. Once you've done that, all you need to do is lean down towards the lower area of the dashboard and locate the OBD2 port situated on the left side. Now that you've found it, the procedure is successfully completed, but you can easily connect a diagnostic tool to it if needed.

Posted on 9 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the radio on the Nissan Murano?
How to reset the radio on the Nissan Murano?
Nissan Murano (2014-2024 / Z52, MK 3) To reset the radio on the Nissan Murano, turn on the ignition so that the central display also lights up: once it is on, rotate the volume knob clock…
What is the fuse layout of the Nissan Murano?
What is the fuse layout of the Nissan Murano?
Nissan Murano (2003-2008 / MK 1, Z50) In case one or more devices in our Nissan Murano have suddenly stopped working, the first thing we can do is check the status of the respective fuses…
How to replace the fuel pump of the Nissan Murano
How to replace the fuel pump of the Nissan Murano
Nissan Murano (2008-2014 / Z51, MK 2) Today's steps will show us how to disassemble and replace the fuel pump of the Nissan Murano, following the instructions below. First, we climb onto …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos