Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Centre Console on Nissan Murano

Model: Nissan Murano Z52, MK 3 - Years 2014-2024
Part: Dashboard

Use a plastic wedge to pry in the gaps of the central dashboard trim, removing it. Similarly, remove the small horizontal plastic piece near the ignition button. At this point, unscrew the two screws now exposed under the climate control panel, then unscrew the two that secure the panel itself and remove it, disconnecting its connector. Once here, unscrew the two screws that secure the air vents and remove them, then unscrew the two screws that secure the radio and disconnect it as well, unplugging its connector and the antenna cable.

Updated on 6 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the car radio in the Nissan Murano?
How to replace the car radio in the Nissan Murano?
Nissan Murano (2008-2014 / Z51, MK 2) As seen in this tutorial, replacing the car radio in the Nissan Murano is an extremely simple and quick operation. Before proceeding, ensure the key …
Disassembly of the instrument panel of the Nissan Murano
Disassembly of the instrument panel of the Nissan Murano
Nissan Murano (2008-2014 / Z51, MK 2) The following steps will show us how to disassemble and remove the instrument panel of the Nissan Murano. First, we open the front driver's side door…
Removing the Front Headlamp from a Nissan Murano
Removing the Front Headlamp from a Nissan Murano
Nissan Murano (2003-2008 / MK 1, Z50) This guide covers the removal of the front headlamp from a Nissan Murano. To remove the front headlamp, you must detach the front bumper. Open the bo…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos