|
Do it yourself
| |||
| ||||
The simplest solution for the brake light that stays on.
Model: Nissan Murano
MK 2, Z51
- Years:
2008, 2009, 2010, 2011, 2012, 2013, 2014
Video tutorial
In this video, we can see a Nissan Murano with a problem that can happen to anyone: the brake lights stay constantly on, whether you are actually braking or not. This can be very dangerous, especially during long highway trips; but it is also a defect that can sometimes be difficult to diagnose, or lead to replacing a number of unnecessary parts, resulting in unnecessary expenses. In most cases, it is a problem that can be easily resolved, as it often involves a broken cable pass-through. What we do is go under the pedal, ask an assistant to check from the back of the vehicle while we press the brake switch: we will place a cable pass-through in the same spot where the brake pedal switch is located, so that when the brakes are pressed, the lights turn on and off normally, and it works!
Posted on 29 January 2026 by ScegliAuto
Related tutorials
Nissan Murano
(2008-2014 /
MK 2, Z51)
Let's start by saying that the Reset procedure explained here should only be carried out after verifying that all the airbags in the car are working …
Nissan Murano
(2008-2014 /
MK 2, Z51)
The Nissan Murano model produced from 2009 to 2014 has a fuse box inside. The fuse box is located inside the front hood, specifically next to the bat…
Nissan Murano
(2008-2014 /
MK 2, Z51)
If the cigarette lighter in your Nissan Murano has suddenly stopped working, first check the status of the relevant fuse, the location of which is in…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in |
How to replace the key fob battery on an Audi A3 2003?
Note that the procedure for replacing the key battery shown in this video is common to many vehicles, not just the Audi A3 2003. After noticing that the key no longer locks and unlocks the vehicle, proceed with the following steps: Remove the emergency key from the fob and use it to pry open the central joint of the fob, opening it halfway. Next, remove the CR2032 battery from its slot and insert a new one with the same specifications. Finally, close the fob and replace the emergency key. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.101
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |