Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Murano
    4. : Car stereo

Nissan Murano - Car stereo

Nissan Murano (2014-2023 / MK 3, Z52)
How do you reset the Nissan Murano car radio?
To be able to reset the Nissan Murano car radio, you need to go and turn on the instrument panel, making sure that the car's central display also turns on: …read all…
Posted on 3 April 2023 by ScegliAuto
Nissan Murano (2008-2014 / Z51, MK 2)
How to replace the car radio in Nissan Murano?
As we can see in this tutorial, replacing the car radio in your Nissan Murano is an extremely simple and fast operation. Before proceeding, let's make sure …read all…
Posted on 21 December 2022 by ScegliAuto
Nissan Murano (2003-2008 / MK 1, Z50)
Removal or replacement of stock car radio
This video shows us how to remove our stock car stereo. First, let's remove the interlocking air vents with special tools, then unhook the plastic panels …read all…
Posted on 29 July 2023 by ScegliAuto
Nissan Murano (2003-2008 / MK 1, Z50)
How to remove the entire center console
In this short video we are going to see how to remove the entire center console, including the car radio. First of all we need to equip ourselves with a flat …read all…
Posted on 24 July 2023 by ScegliAuto
Cigarette Lighter (1) Car stereo (4) Spark plugs (2) Key (4) -board computer (1) Checks and maintenance (1) Dashboard (1) Headlight (2) Cabin air filter (3) Accessory Kit (2) Rear light bulb (1) Handle (2) Starter motor (1) Gear oil (1) Door panel (1) Brake pads (2) Fuel pump (1) Instrument cluster (2) Fuse box (3)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos