Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removal or Replacement of the Standard Radio

Model: Nissan Murano MK 1, Z50 - Years 2003-2008
Part: Car stereo

This video shows how to remove the standard radio. First, remove the air vents that are clipped in place using appropriate tools, then disengage the plastic panels located behind the climate control panel and unscrew the two screws located under the main large screen. Also, remove two screws on the sides where you removed the plastics, and once done, you can proceed to remove the radio by simply sliding it out towards you. Finally, once the radio is extracted, carefully remove all related connectors.

Updated on 10 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the car radio in the Nissan Murano?
How to replace the car radio in the Nissan Murano?
Nissan Murano (2008-2014 / Z51, MK 2) As seen in this tutorial, replacing the car radio in the Nissan Murano is an extremely simple and quick operation. Before proceeding, ensure the key …
How to reset the radio on the Nissan Murano?
How to reset the radio on the Nissan Murano?
Nissan Murano (2014-2024 / Z52, MK 3) To reset the radio on the Nissan Murano, turn on the ignition so that the central display also lights up: once it is on, rotate the volume knob clock…
Installation of iPhone, iPod and AUX
Installation of iPhone, iPod and AUX
Nissan Murano (2003-2008 / MK 1, Z50) The following guide shows how to add an AUX input to your car and install various devices such as iPhone and iPod. If you do not have enough experien…

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos