Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Spark Plugs on a Nissan Murano

Model: Nissan Murano MK 1, Z50 - Years: 2003, 2004, 2005, 2006, 2007, 2008
Part: Spark plugs

See other generations:
Video tutorial

Today's instructions will show you how to disassemble and replace the engine spark plugs on a Nissan Murano by following these simple steps. First, open the bonnet of the vehicle and begin to remove the air filter box by disconnecting the intake hose and undoing the screws at the base with a 10 mm spanner; then remove the engine cover and disconnect the spark plug connectors, as shown in the video.

At this point, use a socket wrench with an extension to unscrew and remove the spark plugs, replacing them with the new original ones.


Updated on 28 August 2026 by ScegliAuto


Related tutorials

How to Replace the Spark Plugs on a Nissan Murano?
How to Replace the Spark Plugs on a Nissan Murano?
Nissan Murano (2014-2024 / Z52, MK 3) .. In this tutorial, you will see how to replace the spark plugs on a Nissan Murano, a very simple operation. First, wait until the engine.. …
How to Remove the Spark Plugs on Nissan Murano
How to Remove the Spark Plugs on Nissan Murano
Nissan Murano (2008-2014 / Z51, MK 2) Replacing the spark plugs on a Nissan Murano, let's see how to remove them. Pull the lever to open the bonnet located at the bottom left of the dashb…
How to reset the radio on the Nissan Murano?
How to reset the radio on the Nissan Murano?
Nissan Murano (2014-2024 / Z52, MK 3) To reset the radio on the Nissan Murano, turn on the ignition so that the central display also lights up: once it is on, rotate the volume knob clock…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos