Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Spark Plugs on a Nissan Murano?

Model: Nissan Murano MK 3, Z52 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Spark plugs

See other generations:
Video tutorial

In this tutorial, you will see how to replace the spark plugs on a Nissan Murano, a very simple operation. First, wait until the engine is completely cold to work safely, then open the bonnet and remove both the air filter box and the plastic engine cover.

Next, locate the three coils, disconnect their connectors, and remove them by unscrewing the securing bolts. At this point, use a long 14mm socket to grip the spark plugs, gently unscrew them, insert the replacements, and reassemble everything by following the reverse procedure.


Updated on 10 October 2026 by ScegliAuto


Related tutorials

Nissan Murano (2003-2008 / Z50, MK 1) Today's instructions will show you how to disassemble and replace the engine spark plugs on a Nissan Murano by following these simple steps. First, o…
Nissan Murano (2008-2014 / MK 2, Z51) Replacing the spark plugs on a Nissan Murano, let's see how to remove them. Pull the lever to open the bonnet located at the bottom left of the dashb…
Nissan Murano (2008-2014 / MK 2, Z51) Today's steps will show you how to remove and replace the fuel pump on the Nissan Murano, following the instructions below. First, access the rear an…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

How to replace the key fob battery on an Audi A3 2003?

Note that the procedure for replacing the key battery shown in this video is common to many vehicles, not just the Audi A3 2003. After noticing that the key no longer locks and unlocks the vehicle, proceed with the following steps: Remove the emergency key from the fob and use it to pry open the central joint of the fob, opening it halfway. Next, remove the CR2032 battery from its slot and insert a new one with the same specifications. Finally, close the fob and replace the emergency key.

Watch the video!


by ScegliAuto

More videos