Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Murano
    4. : How to disassemble the candles on Nissan Murano

Nissan Murano - Video tutorial

Model: Nissan Murano Z51, MK 2 - Years 2008-2014
Part: Spark plugs
Operation: How to disassemble the candles on Nissan Murano

Replacing the spark plugs on a Nissan Murano, let's see the disassembly. We pull the lever to open the engine compartment located at the bottom left of the dashboard and lift the front hood, we secure the same. We disassemble the motor panel, with a special socket wrench we unscrew the screws on the sides of the coils. We grasp the coil with our hands and twist it in a twist way, until it is extracted from the head. Unscrew the spark plugs with a socket wrench (extract them from the cylinder head), take the new spark plug and insert it into the cylinder head with the socket wrench. We test the functioning of the engine. We mount the soundproofing panel.


Posted on 2 December 2023 by ScegliAuto



How do you remove the Nissan Murano headlight?
Nissan Murano (2008-2014 / Z51, MK 2) In order to remove the front headlight of the Nissan Murano it is necessary to completely disassemble the front bumper of the car: the latter is fixe
How to replace the fuel pump (float) on Nissan Murano MK1
Nissan Murano (2003-2008 / MK 1, Z50) Let's see in this video the main steps that will allow us to disassemble and replace the fuel pump on a Nissan Murano first series. First of all, let
How to disassemble the rear door handle in Nissan Murano?
Nissan Murano (2003-2008 / MK 1, Z50) As we can see in this tutorial, disassembling the rear door handle on the Nissan Murano is an extremely simple and fast operation. First of all, open

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos