Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Entire Centre Console

Model: Nissan Murano MK 1, Z50 - Years 2003-2008
Part: Car stereo

In this short video, you will learn how to remove the entire centre console, including the stereo. First, you need a flat, thin tool (or a flat screwdriver) to pry off the upper casing, specifically the one for the air vents. Gently pry on each side of the casing until all the snap parts disengage. Once the first piece is removed, disconnect an electrical connector to access two screws that, when unscrewed, will allow the side cover of the console to drop. Now, there should be two more screws on the sides of the console. Unscrew these last screws, and you can proceed to extract the entire console. Now, all that remains is to disconnect all the wiring from the back of the console, and you're done.

Updated on 9 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Centre Console on Nissan Murano
Removing the Centre Console on Nissan Murano
Nissan Murano (2014-2024 / Z52, MK 3) Use a plastic wedge to pry in the gaps of the central dashboard trim, removing it. Similarly, remove the small horizontal plastic piece near the igni…
How to replace the car radio in the Nissan Murano?
How to replace the car radio in the Nissan Murano?
Nissan Murano (2008-2014 / Z51, MK 2) As seen in this tutorial, replacing the car radio in the Nissan Murano is an extremely simple and quick operation. Before proceeding, ensure the key …
How to Replace the Cabin Air Filter on Nissan Murano
How to Replace the Cabin Air Filter on Nissan Murano
Nissan Murano (2008-2014 / Z51, MK 2) The cabin air filter for this model is located behind the centre console at the bottom. To access the filter housing, you will need to remove the glo…

How to Open the Bonnet on the Lancia Y

To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet.

Watch the video!


by ScegliAuto

More videos