Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Murano
    4. : Brake pads

Nissan Murano - Brake pads

Brake Pads Nissan Murano (2003-2008 / mk 1, z 50)

Nissan Murano (2003-2008 / MK 1, Z50)
Replacing Rear Discs and Pads
Once the vehicle is raised on suitable axle stands and the rear wheel is removed, proceed to detach the brake caliper from its support and then the support …Read all…
Posted on 17 February 2026 by ScegliAuto
Nissan Murano (2003-2008 / MK 1, Z50)
How to Replace Brake Pads
It is good practice to regularly check the wear of the brake pads on your car. This guide shows you what to do when it is necessary to replace them. First, …Read all…
Posted on 3 February 2026 by ScegliAuto
Cigarette lighter (1) Airbag (1) Car stereo (3) Battery (1) Spark plugs (3) Body (1) Key (7) Checks and maintenance (4) Dashboard (1) Headlight (2) Air filter (1) Cabin air filter (3) Accessory kit (2) Light bulb (1) Tail light bulb (1) Handle (2) Starter motor (1) Transmission fluid (1) Clock (2) Door trim panel (1) Brake pads (2) Fuel pump (3) Instrument cluster (1) Fuse box (12) Warning light – error code (4) Service warning light (6)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos