Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Rear Discs and Pads

Model: Nissan Murano MK 1, Z50 - Years: 2003, 2004, 2005, 2006, 2007, 2008
Part: Brake pads

See other generations:
Video tutorial

Once the vehicle is raised on suitable axle stands and the rear wheel is removed, proceed to detach the brake caliper from its support and then the support itself. Extract the disc from the hub (a few taps with a hammer may be necessary to free it); clean the disc seat on the hub thoroughly (brush and apply grease to prevent oxidation); position the new disc, the brake caliper support, the new pads, and finally the caliper itself after retracting the piston using a C-clamp.


Updated on 11 February 2026 by ScegliAuto


Related tutorials

How to Replace Brake Pads
How to Replace Brake Pads
Nissan Murano (2003-2008 / MK 1, Z50) It is good practice to regularly check the wear of the brake pads on your car. This guide shows you what to do when it is necessary to replace them. …
How to Open a Stuck Tailgate on the Nissan Murano?
How to Open a Stuck Tailgate on the Nissan Murano?
Nissan Murano (2014-2024 / Z52, MK 3) On the Nissan Murano, the boot may become stuck due to a fault with the lock or the control button. In such cases, you can still perform an emergency…
How to Replace the Fuel Pump on a Nissan Murano?
How to Replace the Fuel Pump on a Nissan Murano?
Nissan Murano (2003-2008 / MK 1, Z50) In this tutorial, see how to replace the fuel pump on a Nissan Murano. Before proceeding, open the bonnet and disconnect the negative terminal of the…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos