Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Murano
    4. : Cabin air filter

Nissan Murano - Cabin air filter

Nissan Murano (2008-2014 / Z51, MK 2)
Nissan Murano cabin filter replacement
In this video tutorial we will see how to remove and replace the cabin filter of a Nissan Murano. First we must know that the filter is located on the front …read all…
Posted on 19 December 2023 by ScegliAuto
Nissan Murano (2008-2014 / Z51, MK 2)
How to replace the Nissan Murano cabin air filter
The passenger compartment air filter of this model is located behind the center console, in the lower part, but in order to access the filter housing, the …read all…
Posted on 24 October 2023 by ScegliAuto
Nissan Murano (2003-2008 / MK 1, Z50)
Cabin air filter replacement
The passenger compartment air filter is located on the passenger side, behind the glovebox which must therefore be removed. Open the drawer door and unscrew …read all…
Posted on 5 July 2023 by ScegliAuto
Cigarette Lighter (1) Car stereo (4) Spark plugs (2) Key (4) -board computer (1) Checks and maintenance (1) Dashboard (1) Headlight (2) Cabin air filter (3) Accessory Kit (2) Rear light bulb (1) Handle (2) Starter motor (1) Gear oil (1) Door panel (1) Brake pads (2) Fuel pump (1) Instrument cluster (2) Fuse box (3)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos