Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Cabin Filter on Nissan Murano

Model: Nissan Murano Z51, MK 2 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Cabin air filter

See other generations:
Video tutorial

In this tutorial video, you will learn how to remove and replace the cabin filter on a Nissan Murano. First, note that the filter is located on the front passenger side: remove the side carpet by pulling it off by hand and detach the small filter cover by lifting the lever and releasing it. At this point, extract the old filter and replace it with the new one. It is recommended to install only original filters and to insert the filter in the correct direction, which is usually indicated by printed arrows on the filter itself.


Updated on 27 March 2026 by ScegliAuto


Related tutorials

Replacing the CVT Gearbox Oil on the Nissan Murano MK2
Replacing the CVT Gearbox Oil on the Nissan Murano MK2
Nissan Murano (2008-2014 / Z51, MK 2) This guide will show you how to replace the gearbox oil on the second generation Nissan Murano with CVT in simple steps. First, lift the vehicle and …
How to Remove the Spark Plugs on Nissan Murano
How to Remove the Spark Plugs on Nissan Murano
Nissan Murano (2008-2014 / Z51, MK 2) Replacing the spark plugs on a Nissan Murano, let's see how to remove them. Pull the lever to open the bonnet located at the bottom left of the dashb…
How to replace the car radio in the Nissan Murano?
How to replace the car radio in the Nissan Murano?
Nissan Murano (2008-2014 / Z51, MK 2) As seen in this tutorial, replacing the car radio in the Nissan Murano is an extremely simple and quick operation. Before proceeding, ensure the key …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos