Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the CVT Gearbox Oil on the Nissan Murano MK2

Model: Nissan Murano Z51, MK 2 - Years 2008-2014
Part: Transmission fluid

This guide will show you how to replace the gearbox oil on the second generation Nissan Murano with CVT in simple steps. First, lift the vehicle and locate the transmission oil drain bolt; use a hex key to unscrew and let all the old oil drain into a container for about ten minutes. Next, clean the drain plug of any metallic residues and pour the new gearbox oil from the engine bay; fill to the level indicated by the dipstick.

Updated on 26 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Cabin Filter on Nissan Murano
Replacing Cabin Filter on Nissan Murano
Nissan Murano (2008-2014 / Z51, MK 2) In this tutorial video, you will learn how to remove and replace the cabin filter on a Nissan Murano. First, note that the filter is located on the f…
How to Remove the Spark Plugs on Nissan Murano
How to Remove the Spark Plugs on Nissan Murano
Nissan Murano (2008-2014 / Z51, MK 2) Replacing the spark plugs on a Nissan Murano, let's see how to remove them. Pull the lever to open the bonnet located at the bottom left of the dashb…
How to replace the car radio in the Nissan Murano?
How to replace the car radio in the Nissan Murano?
Nissan Murano (2008-2014 / Z51, MK 2) As seen in this tutorial, replacing the car radio in the Nissan Murano is an extremely simple and quick operation. Before proceeding, ensure the key …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos