Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Cabin Air Filter on Nissan Murano

Model: Nissan Murano MK 2, Z51 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Cabin air filter

See other generations:
Video tutorial

The cabin air filter for this model is located behind the centre console at the bottom. To access the filter housing, you will need to remove the glove compartment; start by unscrewing the three fixing screws along the lower edge, then open the door and remove the three screws from the upper fascia and the two at the bottom of the glove compartment.

To extract the glove compartment, unclip the side cap of the dashboard. Once the glove compartment is removed, you can proceed to replace the filter, which is quite flexible as it needs to be manipulated a bit for both extraction and insertion.


Updated on 3 March 2026 by ScegliAuto


Related tutorials

Nissan Murano (2008-2014 / MK 2, Z51) In this tutorial video, you will learn how to remove and replace the cabin filter on a Nissan Murano. First, note that the filter is located on the f…
Nissan Murano (2014-2024 / MK 3, Z52) In the following guide aimed at all of you who own a latest generation Nissan Murano, we will explain how you can safely replace the engine air filte…
Nissan Murano (2003-2008 / Z50, MK 1) Today's instructions will show you how to disassemble and replace the engine spark plugs on a Nissan Murano by following these simple steps. First, o…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

How to replace the key fob battery on an Audi A3 2003?

Note that the procedure for replacing the key battery shown in this video is common to many vehicles, not just the Audi A3 2003. After noticing that the key no longer locks and unlocks the vehicle, proceed with the following steps: Remove the emergency key from the fob and use it to pry open the central joint of the fob, opening it halfway. Next, remove the CR2032 battery from its slot and insert a new one with the same specifications. Finally, close the fob and replace the emergency key.

Watch the video!


by ScegliAuto

More videos