Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Rear Light Bulb on a Nissan Murano

Model: Nissan Murano Z50, MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008
Part: Tail light bulb

See other generations:
Video tutorial

This guide covers the removal of the bulbs in the rear light of a Nissan Murano (tailgate side). To remove the rear light bulbs, you need to detach the tailgate trim.

Lift the rear tailgate, then remove the rear plastic cover. Undo the securing screws of the tailgate cover.

At this point, you will find the bulbs with the bulb holder inside the tailgate; detach the damaged bulbs from inside the light. Secure the new bulbs inside the light.

Reattach all the tailgate cover pieces.


Updated on 17 April 2026 by ScegliAuto


Related tutorials

Nissan Murano (2014-2024 / MK 3, Z52) Below are the steps that will allow us to disassemble and replace the position bulb of the front headlight of the Nissan Murano. First, we open the h…
Nissan Murano (2003-2008 / Z50, MK 1) As shown in this tutorial, removing the rear door handle on a Nissan Murano is a very simple and quick operation. First, open the door in question, t…
Nissan Murano (2014-2024 / MK 3, Z52) On the Nissan Murano, the boot may become stuck due to a fault with the lock or the control button. In such cases, you can still perform an emergency…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Reset the Tyre Warning Light on the MG HS

When the tyre warning light (TPMS) illuminates on the dashboard of your new MG HS, it means the vehicle's control unit has detected a puncture or abnormal pressures. Below, we will discover what you need to do to quickly and easily eliminate this warning light. First, pay attention to the sticker located on the side of the door and note the recommended tyre pressures, then proceed to inflate or replace the tyres if there is a puncture. At this point, start the car and drive a few miles to force a new data reading.

Watch the video!


by ScegliAuto

More videos