Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front headlight position bulb of the Nissan Murano

Model: Nissan Murano Z52, MK 3 - Years 2014-2024
Part: Light bulb

Below are the steps that will allow us to disassemble and replace the position bulb of the front headlight of the Nissan Murano. First, we open the hood of the vehicle and start disconnecting the electrical connector of the position bulb; then we remove the light that is fixed on the bulb holder, as shown in the video. At this point, we install the position bulb, of the correct type and with the same attachment; we replace the low beam bulb if necessary, also replacing the other position light if necessary, following the video tutorial until the end!

Posted on 3 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Headlamp of the Nissan Murano?
How to Remove the Front Headlamp of the Nissan Murano?
Nissan Murano (2008-2014 / Z51, MK 2) To remove the front headlamp of the Nissan Murano, you must completely dismantle the front bumper of the car: it is secured to its housing with screw…
What is the Fuse for the Cigarette Lighter in the Nissan Murano?
What is the Fuse for the Cigarette Lighter in the Nissan Murano?
Nissan Murano (2008-2014 / Z51, MK 2) If the cigarette lighter in your Nissan Murano has suddenly stopped working, first check the status of the relevant fuse, the location of which is in…
Fuse Diagram for a Nissan Murano
Fuse Diagram for a Nissan Murano
Nissan Murano (2014-2024 / Z52, MK 3) In this useful guide, you will see all the diagrams of the fuse boxes for a Nissan Murano, third generation model produced from 2014 to 2024. The vid…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos