Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Nissan Juke?

Model: Nissan Juke MK 2 - Years 2019-2026
Part: Warning light – error code

After completing all scheduled maintenance work on the Nissan Juke, you need to manually reset the relevant warning light. In this video, you can see how to proceed. First, turn on the instrument panel, not the engine, and simultaneously press the two buttons located in the central area of the dashboard. When the warning starts to flash, release the buttons and press the right one multiple times until the interval reaches 18,600 miles. Once done, confirm by holding the left button for at least 5 seconds. Finally, restart the instrument panel and check that the procedure has been executed correctly.

Updated on 8 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the Nissan Juke
How to Reset the Service Light on the Nissan Juke
Nissan Juke (2010-2019 / MK 1) Here are the steps to reset the service light for the regular maintenance oil change on the Nissan Juke. First, get into the vehicle and press and ho…
How to Reset the Service Light on the Nissan Juke
How to Reset the Service Light on the Nissan Juke
Nissan Juke (2010-2019 / MK 1) .. The following video tutorial shows how to reset the service light on a Nissan Juke independently. If the light does not reset, a visit to.. …
How to reset the Service light on the Nissan Juke?
How to reset the Service light on the Nissan Juke?
Nissan Juke (2019-2026 / MK 2) To reset the Service light on the Nissan Juke, turn on the ignition and then navigate through the menu using the directional controls on the left sid…

Other guides you may be interested in

    Frequently Asked Questions

    • Juke 2010-2019 - Why did the P / S light come on in the Nissan Juke? Read answer
    • Juke 2010-2019 - What does the red engine light on the Nissan Juke mean? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos