Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fitting the Scuff Plate on the Nissan Qashqai

Model: Nissan Qashqai J11 - Years 2014-2022

In this short and simple guide, we will go through the steps to install the front scuff plate on the Nissan Qashqai, following the instructions below. First, open the front door and take the necessary measurements of the pillar to ensure a perfect fit for your scuff plate. Then, thoroughly clean the bodywork using appropriate degreasers. Next, fit the adhesive scuff plate, ensuring it adheres perfectly. Repeat the same process for the installation of the rear scuff plate, following the video tutorial to the end!

Updated on 8 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Install Protective Sill Strips on the Nissan Qashqai J11
How to Install Protective Sill Strips on the Nissan Qashqai J11
Nissan Qashqai (2014-2022 / J11) In this video, you will see how to fit the protective sill strips on the threshold of the Nissan Qashqai J11 version. We can recommend a better produ…
How to Install the Reversing Camera on the Nissan Qashqai?
How to Install the Reversing Camera on the Nissan Qashqai?
Nissan Qashqai (2006-2014 / J10) To install the reversing camera on the Nissan Qashqai, lift the rear hatch of the vehicle to access the screws securing the panel inside. This panel …
Removing the Front Door Panel on the Nissan Qashqai 2018
Removing the Front Door Panel on the Nissan Qashqai 2018
Nissan Qashqai (2014-2022 / J11) Let’s look at removing the door panel of the Nissan Qashqai. Remove the cover panel if damaged or if you need to work inside the door. Remove the tri…

    Frequently Asked Questions

    • Qashqai 2006-2014 - Where is the reverse switch of a Nissan Qashqai located? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos