Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Nissan Qashqai

Model: Nissan Qashqai J10 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Service warning light

See other generations:
Video tutorial

In this video tutorial, you can see how to reset the maintenance light on the Nissan Qashqai by following essential steps. First, if the maintenance light is on, you must change the engine oil and filters; once maintenance is complete, get in the vehicle, turn on the instrument cluster by turning the key to ON, press and hold the button located at the bottom left of the speedometer; hold the button until the service indicator starts to flash; now release the button and turn the key to OFF. Turn the instrument cluster back on and press the button on the right twice, then wait for confirmation for the next service.


Updated on 14 May 2026 by ScegliAuto


Related tutorials

How to Reset the Service in the Nissan Qashqai?
How to Reset the Service in the Nissan Qashqai?
Nissan Qashqai (2014-2022 / J11) In this tutorial, see how to reset the service in the Nissan Qashqai, an extremely simple and quick operation to be carried out only after completing…
How to reset the service in the Nissan Qashqai?
How to reset the service in the Nissan Qashqai?
Nissan Qashqai (2006-2014 / J10) Resetting the service in the Nissan Qashqai, as we can see in this tutorial, is an extremely simple and quick operation. Before proceeding, we must h…
How to reset the service in the Nissan Qashqai?
How to reset the service in the Nissan Qashqai?
Nissan Qashqai (2014-2022 / J11) In this tutorial we can see how to reset the service in the Nissan Qashqai, an extremely simple and quick operation, to be done only once all schedul…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos