Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Navara
    4. : Nissan Navara d40 fuse box diagram

Nissan Navara - Video tutorial

Model: Nissan Navara D40 - Years 2005-2015
Part: Fuse box
Operation: Nissan Navara d40 fuse box diagram

In this video we will show you the diagram of the fuse box of the Nissan Navara d40. Open the engine hood and look behind the battery. You will find them in a black plastic box. Unclip the cover by pulling up on the tab and you will find part of the fuses. Inside the plastic cover you can read the fuse diagram and the various correspondences. Moving to the opposite side of the motor you will find two more boxes in which other relays are housed. Inside the lids you can read the corresponding diagrams. Finally, moving into the passenger compartment, behind the glovebox on the passenger side you will find another section of fuses. Behind the drawer there is a label indicating the diagram.


Posted on 7 May 2024 by ScegliAuto

    Frequently Asked Questions

    • Navara 2014-2023 - What is the position of the fuse box on the Nissan Navara? Read Answer
    • Navara 2005-2015 - Where are the fuse boxes located on Nissan Navara D40? Read Answer
    • Navara 2005-2015 - Where is the towbar fuse of a Nissan Navara located? Read Answer
    • Navara 2005-2015 - Where is the Nissan Navara fuse box located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos