Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Qashqai
    4. : How to replace the speakers in the Nissan Qashqai?

Nissan Qashqai - Video tutorial

Model: Nissan Qashqai J11 - Years 2014-2022
Part: Loudspeaker
Operation: How to replace the speakers in the Nissan Qashqai?

In this video tutorial we can see how to replace the door speakers in the Nissan Qashqai J11. This is a very simple operation detailed in the video. First of all, the internal door panel must be removed by disengaging the handle mask, the handle itself and unscrewing all the screws indicated. After removing the window control console as well, you can proceed by disengaging the panel from the door. At this point it will be sufficient to remove the screws that hold the speaker firmly, disconnect the connector and assemble the spare according to the procedures provided. You may need an adapter if you want to mount a speaker of a different size than the original.


Posted on 30 May 2022 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos