Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Brake Pads on the Suzuki Equator?

Model: Nissan Frontier D40 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Brake pads

See other generations:
Video tutorial

To replace the front brake pads on the Suzuki Equator, lift the vehicle with a jack so that the wheel corresponding to the pads being replaced is off the ground. Once the wheel is lifted, remove it from the hub by unscrewing the bolts that secure it. This will allow you to loosen the bolts that secure the brake caliper and remove it from its housing, sliding out the pads inside.

At this point, insert the new pads into the caliper, position it on the rotor, and secure it with the appropriate bolts.


Updated on 26 May 2026 by ScegliAuto


Related tutorials

How to Replace the Front Brake Pads on a Nissan Frontier?
How to Replace the Front Brake Pads on a Nissan Frontier?
Nissan Frontier (2021-2026 / D41) To replace the front brake pads on a Nissan Frontier, lift the vehicle with a jack so that the wheel corresponding to the pads being replaced is off …
How to Replace the Front Brake Pads of the Nissan Frontier?
How to Replace the Front Brake Pads of the Nissan Frontier?
Nissan Frontier (1997-2021 / D40) To replace the front brake pads of the Nissan Frontier, lift the car with a jack so that the wheel corresponding to the pads being replaced is not in…
How to Replace the Front Wheel Bearing on the Nissan Frontier
How to Replace the Front Wheel Bearing on the Nissan Frontier
Nissan Frontier (1997-2021 / D40) In this brief guide, you will learn how to disassemble and replace the front wheel bearing on the Nissan Frontier by following these simple steps. Fi…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos