Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Frontier
    4. : How to replace the front wheel bearing of Nissan Frontier

Nissan Frontier - Video tutorial

Model: Nissan Frontier D40 - Years 1997-2021
Part: Bearing
Operation: How to replace the front wheel bearing of Nissan Frontier

Let's see in this short guide how to remove and replace the front wheel bearing of the Nissan Frontier, following these simple steps. First we lift the car and start by removing the front wheel; then we go to unscrew the fixing screws of the brake caliper, in order to remove it from the disc, as shown in the video. At this point we unscrew the central bearing nut to remove it, also removing the brake disc; then replace the bearing with the new one, inserting it up to the stop, following the video tutorial to the end!


Posted on 3 May 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos