Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Wheel Bearing on a Nissan Sunny

Model: Nissan Sunny N17 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Bearing

See other generations:
Video tutorial

In this brief and simple guide, we will go through the steps to remove and replace the rear wheel bearing or drum on a Nissan Sunny. First, raise the vehicle and remove the rear wheel.

Next, remove the center nut of the drum using a socket wrench with an extension to take it off. At this point, use a press to remove the old bearing located inside the drum. Then, install the new bearing, tapping it in until it is perfectly seated.

Finally, reassemble the drum and the wheel!


Updated on 13 July 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Suspension on a Nissan Sunny
How to Replace the Rear Suspension on a Nissan Sunny
Nissan Sunny (2011-2020 / N17) Follow the main steps to remove and replace the rear suspension on a Nissan Sunny. First, open the trunk and remove the suspension nut located at the…
How to Replace the Rear Light Bulbs in the Nissan Sunny?
How to Replace the Rear Light Bulbs in the Nissan Sunny?
Nissan Sunny (2011-2020 / N17) As we can see in this tutorial, replacing the rear light bulbs in the Nissan Sunny is an extremely simple and quick operation. First, ensure that the…
How to Replace the Control Arm on the Nissan Sunny
How to Replace the Control Arm on the Nissan Sunny
Nissan Sunny (2011-2020 / N17) This guide provides instructions to remove and replace the control arm on the Nissan Sunny. First, lift the vehicle and remove the front wheel. Then,…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos