Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Spark Plugs on a Nissan Tiida?

Model: Nissan Tiida Versa C12 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Spark plugs

See other generations:
Video tutorial

To replace the spark plugs on a Nissan Tiida, open the hood to access the components inside the engine compartment. You will need to remove the bolts securing the cover on top of the engine block to access the underlying components.

Loosen the screws holding the injectors, disconnect their connectors, and remove them from their housing. Underneath, you will find the spark plugs, which should be removed with a socket wrench and replaced with new replacement parts.

After replacement, reassemble all previously removed components.


Updated on 7 June 2026 by ScegliAuto


Related tutorials

How to Replace Spark Plugs on the Nissan Tiida Versa
How to Replace Spark Plugs on the Nissan Tiida Versa
Nissan Tiida Versa (2011-2018 / C12) To replace the spark plugs on the vehicle, follow these instructions: open the hood, lift the engine cover, disconnect the battery cables, and remove…
Where to Find the Fuse Box on a Nissan Tiida
Where to Find the Fuse Box on a Nissan Tiida
Nissan Tiida Versa (2004-2011 / C11) If you own a Nissan Tiida (2007-2011) and are wondering where the fuse box is located, read this guide and follow the instructions to find it yoursel…
Where Are the Fuses Located on the Nissan Tiida?
Where Are the Fuses Located on the Nissan Tiida?
Nissan Tiida Versa (2004-2011 / C11) The fuses on the Nissan Tiida are located inside the designated fuse boxes installed in the vehicle. This car model has two fuse boxes. The first is …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos