Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Injectors on a Nissan Qashqai 1.5 DCI

Model: Nissan Qashqai J10 - Years 2006-2014
Part: Fuel injectors

In this video tutorial, you will find instructions on how to remove and replace the fuel injectors on the first series Nissan Qashqai with a 1.5 DCI engine. First, open the engine bonnet and start by disconnecting the intake hose from the exhaust gas recirculation pipe; then unscrew the screws of the upper plastic cover, subsequently releasing the tabs found at the bottom, as shown in the video. At this point, disconnect the electrical connectors of the injectors; use a socket spanner with an extension to unscrew and remove them, following the video to the end!

Updated on 10 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Injectors on the Nissan Qashqai J10 1.5 DCI
How to Replace the Injectors on the Nissan Qashqai J10 1.5 DCI
Nissan Qashqai (2006-2014 / J10) In this video tutorial, you will learn how to remove and replace the fuel injectors on the Nissan Qashqai J10 with a 1.5 DCI engine. First, open the …
How and When to Replace the Timing Belt on the Nissan Qashqai J10
How and When to Replace the Timing Belt on the Nissan Qashqai J10
Nissan Qashqai (2006-2014 / J10) Discover in this video the step-by-step instructions for removing and replacing the timing belt, and when to change it, on the Nissan Qashqai 1.5 DCI…
Replacing the Diesel Filter on the Nissan Qashqai 2.0 dCi
Replacing the Diesel Filter on the Nissan Qashqai 2.0 dCi
Nissan Qashqai (2006-2014 / J10) Follow this guide to remove and replace the diesel filter on the Nissan Qashqai 2.0 dCi in simple and quick steps. First, open the bonnet of your car…

Other guides you may be interested in

    Frequently Asked Questions

    • Qashqai 2014-2022 - How much does it cost to replace the injectors on the Nissan Qashqai? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos