Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Centre Console from the Nissan Micra

Model: Nissan Micra K12 - Years 2002-2010
Part: Center console tunnel

In this video, you will discover how to remove the centre console from the Nissan Micra, following the instructions provided below. First, get inside the vehicle and start by removing the gear knob and gaiter; then remove the plastic cap located on the centre console, subsequently unscrewing all the screws found on the sides and the rear of the plastic, as illustrated in the video. At this point, completely remove the centre console by lifting it upwards and disconnecting the electrical connector; all that remains is to refit everything!

Updated on 10 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Disassembly of the handbrake lever of the Nissan Micra
Disassembly of the handbrake lever of the Nissan Micra
Nissan Micra (2002-2010 / K12) In this guide we will see the instructions that will allow us to disassemble and replace the handbrake lever of the Nissan Micra. First of all, we ge…
Replacing the Gear Knob on Nissan Micra
Replacing the Gear Knob on Nissan Micra
Nissan Micra (1992-2002 / K11) Want to remove the gear knob from the Nissan Micra? Here’s how to replace the knob from above the centre tunnel. Hold the knob in your hands and twis…
How to Remove the Gear Knob on the Micra K12
How to Remove the Gear Knob on the Micra K12
Nissan Micra (2002-2010 / K12) Let's look at removing the knob and the gaiter covering the stick. Take the knob in your hands and rotate it left and right until you can remove it f…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos