Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Radio from a Nissan Micra?

Model: Nissan Micra K12 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Car stereo

See other generations:
Video tutorial

To remove the radio from a Nissan Micra, use a tool to lever off the plastic panel located directly above the radio. Once this panel is removed, you can unscrew the screws underneath, allowing the radio to be extracted from its housing.

This will enable you to disconnect the connectors and completely remove the device, so that new connectors can be attached to the replacement unit. After the new radio is connected, insert it back into its housing, securing it with the appropriate screws.


Updated on 16 June 2026 by ScegliAuto


Related tutorials

How to Remove the Radio from a Nissan Micra
How to Remove the Radio from a Nissan Micra
Nissan Micra (2010-2017 / K13) Before you begin, sit in the driver's seat of your Nissan Micra. Start by unclipping and removing the upper section of the radio frame by simply pull…
Removing the Radio from a Nissan Micra
Removing the Radio from a Nissan Micra
Nissan Micra (2002-2010 / K12) .. In this video, you will learn how to remove the radio from a Nissan Micra. The removal process does not require special technical knowledge,.. …
Why Did the "Radio Code" Message Appear in the Nissan Micra?
Why Did the "Radio Code" Message Appear in the Nissan Micra?
Nissan Micra (2010-2017 / K13) The appearance of the "radio code" message on the Nissan Micra's radio indicates that the special PIN must be entered to unlock the radio. This proce…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos