Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Rogue
    4. : How to replace the key battery of Nissan Rogue [USA]

Nissan Rogue - Video tutorial

Model: Nissan Rogue T32 - Years 2014-2020
Part: Key
Operation: How to replace the key battery of Nissan Rogue [USA]

To replace the battery of the Nissan Rogue key, it is necessary to proceed as follows: take a small screwdriver and insert it in the upper part of the key (side where there is the eyelet) in the junction between the two shells. Press to release the two plastic shells that make up the key. Identify the battery inside and lever to remove it with the same screwdriver, take the new battery (model CR2032) and place it on the housing paying attention to the direction (positive pole above). Take the two shells and reposition them one on top of the other by exerting pressure to lock them.


Posted on 24 October 2022 by ScegliAuto



How to replace the key battery in the Nissan Rogue
Nissan Rogue (2014-2020 / T32) If the key of your Nissan Rogue second series (year 2014-2020) has suddenly stopped working and you want to find out how to replace the battery conta
How to replace the battery in the Nissan Rogue 2 key.
Nissan Rogue (2014-2020 / T32) In this new guide dedicated to all Nissan Rogue second series owners (year 2014-2020), we will discover how to replace the button battery located ins
How to replace the battery in the key of the Nissan Rogue 2.
Nissan Rogue (2014-2020 / T32) If you are wondering how to replace the battery in the key of your second-generation Nissan Rogue (2014-2020), then you just need to carefully read t

Other guides that may interest you

    Frequently Asked Questions

    • Rogue 2021-2027 - What to do if my Nissan Rogue does not detect the key? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos