Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Navara
    4. : Where is the fuse box in the Nissan Navara

Nissan Navara - Video tutorial

Model: Nissan Navara D23 - Years 2014-2023
Part: Fuse box
Operation: Where is the fuse box in the Nissan Navara

In today's video you will see where the main fuse box is located in the Nissan Navara. This video will come in handy if you need to replace or check one or more corresponding units. First, enter the vehicle on the passenger side and open the glove box in front of you. Then open the flap that you find inside and behind it you will find the fuse box. You will then find the complete fuse diagram represented on a glued card or, alternatively, placed in the use and maintenance manual of your car. Operation finished.


Posted on 25 December 2022 by ScegliAuto

    Frequently Asked Questions

    • Navara 2014-2023 - What is the position of the fuse box on the Nissan Navara? Read Answer
    • Navara 2005-2015 - Where are the fuse boxes located on Nissan Navara D40? Read Answer
    • Navara 2005-2015 - Where is the towbar fuse of a Nissan Navara located? Read Answer
    • Navara 2005-2015 - Where is the Nissan Navara fuse box located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos