Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Navara
    4. : Where are the fuses located in the Nissan Navara?

Nissan Navara - Video tutorial

Model: Nissan Navara D22 - Years 1997-2004
Part: Fuse box
Operation: Where are the fuses located in the Nissan Navara?

The fuses of the Nissan Navara are divided into two fuse boxes that are installed in the vehicle: the first one is located in the lower left part of the dashboard, next to the steering column. Inside this box, you can find the fuses that are responsible for the operation of the power windows, interior lights, fog lights, etc. The second box is located on the left side of the engine compartment: inside it, you can find the fuses that are responsible for the central locking, horn, ABS, etc.


Posted on 2 September 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Navara 2014-2023 - What is the position of the fuse box on the Nissan Navara? Read Answer
    • Navara 2005-2015 - Where are the fuse boxes located on Nissan Navara D40? Read Answer
    • Navara 2005-2015 - Where is the towbar fuse of a Nissan Navara located? Read Answer
    • Navara 2005-2015 - Where is the Nissan Navara fuse box located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos