Do it yourself
Frequently asked questions about cars and motorcycles

Replace the Number Plate Bulb in a Nissan Qashqai with a LED

Model: Nissan Qashqai J11 - Years 2014-2022
Part: Checks and maintenance

Let's see how to change the number plate bulb in a Nissan Qashqai with a LED. You can find these bulbs on Auxito.com, and they cost £17.99 for a pack of 2. As the YouTuber shows in the video, never touch the bulbs with bare hands, only use disposable gloves, as touching them with bare hands would significantly shorten their lifespan. To avoid damaging the number plate light covers, use plastic spatulas. Apply upward pressure to remove the cover. Once the cover is off, the bulb remains. Just pull it out to remove it. Insert the new one. It has no polarity, so it doesn't matter which way you fit it. You can close it up and replace the cover. Repeat with the other cover, and the operation is complete.

Updated on 26 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Nissan Qashqai (2006-2014 / J10) If one of the license plate lights of your Nissan Qashqai J10 has stopped working, you must replace it as soon as possible, especially to avoid getti…
Nissan Qashqai (2006-2014 / J10) Using a small flathead screwdriver, begin by prising off the entire number plate light assembly from your Nissan Qashqai to access the blown bulb. Pr…
Nissan Qashqai (2014-2022 / J11) Today, let's discover the steps that will show us how to remove and replace the license plate bulbs of the Nissan Qashqai in simple steps. First, let…

    Frequently Asked Questions

    • Qashqai 2006-2014 - Where is the oil dipstick on the Nissan Qashqai? Read answer
    • Qashqai 2014-2022 - Why does the cruise control of the Nissan Qashqai not work? Read answer
    • Qashqai 2006-2014 - Why are the Nissan Qashqai steering wheel buttons not working? Read answer
    • Qashqai 2006-2014 - Where is the Nissan Qashqai indicator relay located? Read answer
    • Qashqai 2014-2022 - How do you disable Start and Stop in a Nissan Qashqai? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos