Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Qashqai
    4. : How do you replace the low beam bulb on your Nissan Qashqai?

Nissan Qashqai - Video tutorial

Model: Nissan Qashqai J10 - Years 2006-2014
Part: Headlight bulb
Operation: How do you replace the low beam bulb on your Nissan Qashqai?

If the low beam bulb of your Nissan Qashqai should burn out, this video tutorial could help you solve the problem. The model in question was produced from 2007 to 2010. The front bonnet opens and, as the protagonist of the film clearly explains, the most important thing to pay attention to is the air intake manifold. Only by disassembling the latter will it be possible to access the bulb holder of the front optical assembly by hand, therefore the plastic clips that block it to the bodywork will have to be removed and then the bulb in question will be disassembled and replaced.


Posted on 30 April 2023 by ScegliAuto

    Frequently Asked Questions

    • Qashqai 2006-2014 - How do you replace the front headlight bulb on a Nissan Qashqai? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos