Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Dipped Beam Bulbs in a Nissan Qashqai?

Model: Nissan Qashqai J11 - Years 2014-2022
Part: Headlight bulb

In this tutorial, you will see how to replace the dipped beam bulbs in a Nissan Qashqai, a very simple and quick operation. Start by opening the bonnet, then locate the cap at the back of the headlamp and remove it. At this point, extract the old bulb by turning it 45 degrees anti-clockwise, disconnect the connector using a flat-head screwdriver, and install the replacement bulb by turning it clockwise to secure it in the housing. Finally, reposition the rear cap and repeat the process for the opposite headlamp if necessary.

Updated on 12 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Dipped Beam Light on Nissan Qashqai
Nissan Qashqai (2006-2014 / J10) Let's see how to remove the front headlight bulbs on the Nissan Qashqai. Open the bonnet by pulling the lever located at the bottom right of the dash…
Removing Fog Light Bulbs on a Nissan Qashqai
Removing Fog Light Bulbs on a Nissan Qashqai
Nissan Qashqai (2006-2014 / J10) Have the fog light bulbs blown? Here’s how to replace them on a Nissan Qashqai. To remove the bulbs, you need to take off the wheel arch liner above …
How to Adjust the Headlights on the Nissan Qashqai?
How to Adjust the Headlights on the Nissan Qashqai?
Nissan Qashqai (2014-2022 / J11) In this tutorial, you will see how to adjust the headlights on the Nissan Qashqai, a very simple and quick operation. First, park the vehicle in fron…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos