|
Do it yourself
| |||
| ||||
How to Replace the Oil and Oil Filter on the Nissan Rogue Sport
Model: Nissan Rogue Sport
MK 1
- Years 2017-2024
To replace the oil and oil filter on the Nissan Rogue Sport, start by opening the oil fill cap and lifting the oil dipstick. Go under the vehicle and, using a 14 mm socket wrench, remove the oil drain plug and let the oil drain into a container. Once drained, clean the plug and the seating area, then reinstall it. Next, locate the oil filter, remove it with an appropriate wrench or pliers, allowing the oil to drain into a container. After the oil has drained, clean the seating area. Now take the new oil filter out of the packaging, apply new oil to the gasket, and reinstall it in its place. Move to the top of the engine, remove the oil fill cap, and pour in the specified quarts of oil using a funnel. When you are close to the indicated quarts, check the level with the dipstick (check the level a second time after removing the dipstick). If necessary, top off the oil; otherwise, if the oil is at the max mark, the operation is complete.
Updated on 9 July 2026 by ScegliAuto
Video tutorial
Related tutorials
Nissan Rogue Sport
(2017-2024 /
MK 1)
Today, you will learn how to perform the routine maintenance service by replacing the engine oil and oil filter on the Nissan Rogue Sport. First, lif…
Nissan Rogue Sport
(2017-2024 /
MK 1)
If you want to change the engine oil and the related filter on this vehicle, you can find the instructions on how to proceed in the video and descrip…
Nissan Rogue Sport
(2017-2024 /
MK 1)
In this guide we will see the instructions that will allow us to disassemble and eventually replace the central air vents of the Nissan Rogue Sport, …
Other guides you may be interested in
|
How to Check the Oil Level on a Jeep Renegade?
To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.652
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |