Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Note
    4. : How do you replace the headlight bulb on a Nissan Note?

Nissan Note - Video tutorial

Model: Nissan Note MK 1, E11 - Years 2004-2013
Part: Headlight bulb
Operation: How do you replace the headlight bulb on a Nissan Note?

In order to replace the headlight bulb on the Nissan Note, you need to go and open the bonnet, so that you can access the components located inside the engine compartment: here you can disconnect the connector connected to the inside of the headlight, detaching the circular protective cover. After the latter has been removed, it will be possible to remove the corresponding bulb from inside its housing, replacing it with a new spare part: this must now be inserted inside its housing, connecting it to the connector and covering everything with the cover.


Posted on 6 May 2023 by ScegliAuto



Nissan Note headlight bulb replacement
Nissan Note (2004-2013 / MK 1, E11) In this video we are going to see how to remove and change the headlight bulb of our Nissan Note. We open the bonnet and carefully remove the plug th
How to replace the headlight bulb on Nissan Note 2
Nissan Note (2012-2022 / E12, MK 2) If the headlight bulb of your Nissan Note E12 (year 2012-2020) has stopped working due to a fault and you want to find out how to replace it, you jus
How to replace the headlight bulb of Nissan Note
Nissan Note (2004-2013 / MK 1, E11) In this video tutorial we will see how to remove and replace the headlight bulb of the Nissan Note, following these simple and quick steps. First of

Other guides that may interest you

    Frequently Asked Questions

    • Note 2004-2013 - How much does a Nissan Note front position light bulb cost? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos