Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Navara
    4. : How to reset the service in the Nissan Navarra?

Nissan Navara - Video tutorial

Model: Nissan Navara D23 - Years 2014-2023
Part: Checks and maintenance
Operation: How to reset the service in the Nissan Navarra?

Resetting the service in the Nissan Navarra, as we can see in this tutorial, is an extremely simple and fast operation. Before doing this, make sure you have completed all scheduled maintenance work. Let's start by positioning ourselves inside the passenger compartment, then turn on the instrument panel and, using the directional buttons located on the left side of the steering wheel, go to the settings menu. We then enter "Maintenance", select the service in question and carry out the reset using the appropriate option. Finally, we restart the vehicle.


Posted on 23 May 2023 by ScegliAuto

    Frequently Asked Questions

    • Navara 2014-2023 - Where is the fuel tank of the Nissan Navara located? Read Answer
    • Navara 2014-2023 - What are the problems with the AdBlue of the Nissan Navara? Read Answer
    • Navara 2014-2023 - What are the problems with the AdBlue on the Nissan Navara NP300? Read Answer
    • Navara 2005-2015 - What problems have affected the Nissan Navara? Read Answer
    • Navara 2014-2023 - What are the warning lights on the Nissan Navara? Read Answer
    • Navara 2014-2023 - How much does it cost to replace the courtesy light switches in the Nissan Navarra? Read Answer
    • Navara 2005-2015 - How do I reset the Nissan Navara Service light? Read Answer
    • Navara 2005-2015 - Where is the jack of a Nissan Navara located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos