Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. X Trail
    4. : How to deactivate the Start & Stop of the Nissan XTrail T32

Nissan X Trail - Video tutorial

Model: Nissan X Trail MK 3, T32 - Years 2014-2023
Operation: How to deactivate the Start & Stop of the Nissan XTrail T32

With this short video tutorial we will explain how to deactivate the Start & Stop of the Nissan X-Trail T32. What you need to use is: a small clamp and thin-nosed pliers. The first thing to do is open the bonnet and look for the hooking point, in fact the clamp must be inserted precisely in that point, for reference we find the video. To carry out this simple operation, use the pliers, without tightening too much; in fact, the purpose of this clamp inserted in the coupling point of the bonnet is precisely to interrupt the Start & Stop. Once everything is done we just have to close the bonnet and take a test drive, you will immediately notice how the signal will not activate and no fault signal will appear on the screen.


Posted on 4 June 2023 by ScegliAuto

    Frequently Asked Questions

    • X Trail 2014-2023 - What does service expired mean in a Nissan X-Trail? Read Answer
    • X Trail 2001-2006 - What problems can a Nissan X-trail have? Read Answer
    • X Trail 2014-2023 - Where is the cigarette lighter fuse located in a Nissan X-Trail? Read Answer
    • X Trail 2014-2023 - How many kilometers can a Nissan X-Trail travel in total? Read Answer

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos