Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Activate and Deactivate the Start&Stop System in a Nissan X-Trail

Model: Nissan X Trail T32, MK 3 - Years 2014-2023
Part: Checks and maintenance

This guide briefly outlines the instructions to deactivate and activate the Start&Stop system in a Nissan X-Trail in simple steps. First, get into the cabin and start the engine; on the first engine start, the Start&Stop will be activated and can only be deactivated using the button located at the bottom of the dashboard, as shown in the video. When the button has the indicator light on, it means the Start&Stop is deactivated; it can be reactivated at any time by pressing the Start&Stop button again!

Updated on 16 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you deactivate the Start&Stop feature of the Nissan X-Trail?
How do you deactivate the Start&Stop feature of the Nissan X-Trail?
Nissan X Trail (2014-2023 / T32, MK 3) .. deactivate the Start&Stop system of the Nissan X-Trail, you need to insert the ignition key into the corresponding slot, so that you can turn on the instrument.. …
How to deactivate the start and stop feature in the Nissan X Trail?
How to deactivate the start and stop feature in the Nissan X Trail?
Nissan X Trail (2014-2023 / T32, MK 3) The start and stop is one of the devices that have been in use in cars for some years now and it serves to reduce exhaust emissions by turning off th…
How to Disable Start & Stop on the Nissan X-Trail T32
How to Disable Start & Stop on the Nissan X-Trail T32
Nissan X Trail (2014-2023 / T32, MK 3) .. disable the Start & Stop feature on the Nissan X-Trail T32. You will need: a small tie and a pair of fine-nosed pliers. The first step is to open the.. …

Other guides you may be interested in

    Frequently Asked Questions

    • X Trail 2007-2014 - Where is the inertia switch on the Nissan X-Trail? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos