Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Remote Key Battery Replacement

Model: Nissan 350z MK 1 - Years 2002-2009
Part: Key

To replace the battery in the remote key, separate the two halves of the remote: on the back, there is a small slot where you can insert a small screwdriver to lever apart the halves; one half contains the buttons and the electronic circuit, while the other half holds only the battery. Remove the old battery, clean the contact tabs, and fit the new battery, ensuring the correct polarity. If you wish to disassemble the other half of the casing, first remove the electronic circuit, then the button strip, and finally the rubber cover. Reassemble in reverse order.

Updated on 17 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Remote Battery on a Nissan 350Z
How to Replace the Remote Battery on a Nissan 350Z
Nissan 350z (2002-2009 / MK 1) In this tutorial, you will see how to replace the remote battery on a Nissan 350Z, a very simple and quick operation. For this, you will need a small…
How to Program the Car Ignition Key
Nissan 350z (2002-2009 / MK 1) This video explains how to programme the remote for the keyless entry of a Nissan 350Z. Sit in the driver's seat and ensure both windows are fully cl…
How to Replace the Key Battery on a Nissan 350Z
How to Replace the Key Battery on a Nissan 350Z
Nissan 350z (2002-2009 / MK 1) Thanks to the compact and minimalist design of your Nissan 350Z key, replacing the internal battery is quick and simple. Just follow these instructio…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos