Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Oil Change Light on the Nissan Qashqai

Model: Nissan Qashqai J10 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Warning light – error code

See other generations:
Video tutorial

This video shows how to reset the oil light on the Nissan Qashqai. First, press the TRIP button located in the centre on the right of the instrument cluster, hold it down while turning on the ignition without starting the engine, and then keep the button pressed for about 20 seconds until the remaining mileage starts to flash.

At this point, release the button and press it again to complete the reset. The remaining kilometres until the next oil change will now be displayed.

The procedure is very simple and quick to perform.


Updated on 22 July 2026 by ScegliAuto


Related tutorials

Nissan Qashqai (2014-2022 / J11) After performing a complete engine oil change and replacing the filter, you can reset the maintenance light on your Nissan Qashqai. Start by insertin…
Nissan Qashqai (2006-2014 / J10) The selected video tutorial shows how to reset the engine oil light on a 2013 Nissan Qashqai. Get into the car and turn on the instrument panel witho…
Nissan Qashqai (2006-2014 / J10) To change the engine oil on a Nissan Qashqai, lift the car with a jack or ramp to access the screws securing the undertray at the bottom of the vehic…

    Frequently Asked Questions

    • Qashqai 2014-2022 - What does it mean when the "chassis control system error" indication lights up on the Nissan Qashqai? Read answer
    • Qashqai 2014-2022 - What does the yellow brake warning light on the Nissan Qashqai mean? Read answer
    • Qashqai 2014-2022 - Why is the Nissan Qashqai handbrake warning light flashing? Read answer
    • Qashqai 2014-2022 - What does the red engine light on the Nissan Qashqai mean? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos