Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Qashqai
    4. : Added kit for automatic closing of rear-view mirrors

Nissan Qashqai - Video tutorial

Model: Nissan Qashqai J10 - Years 2006-2014
Part: Accessory Kit
Operation: Added kit for automatic closing of rear-view mirrors

To begin with, remove the control panel for the rear view mirror adjustment and disconnect the control connector, take your kit and insert the two smaller connectors in place of the one you just removed, they are shaped in such a way as to make it impossible to insert them. correct, and attach the original connector to the third connector of the kit, with this you have completed the first part of the assembly. Now remove, as shown in the video, all the side tunnel on the driver's side and then reach the cable to which the control is to be connected to close the mirrors. Following the detailed instructions in the video, connect the second cable of the kit and lay it along the door sill until it reaches the central upright, here connect it to the previous connector. You can then reassemble all the plastic parts of the side tunnel and connect the kit power supply to the fuse box in an unused position. This guide is valid for the Nissan Qashqai only


Posted on 22 June 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos