Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Filter on a Nissan Micra K13

Model: Nissan Micra K13 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Fuel filter

See other generations:
Video tutorial

This guide shows how to replace the fuel filter on the Nissan Micra K13; this operation can also be applied to the Renault Pulse. The first step is to open the bonnet and disconnect the battery.

Remove the battery securing block and take it out. Remove the three securing bolts of the ECU, two at the base and one at the rear. Remove the battery tray securing bolts and take it out for more working space.

Remove the securing bolts of the filter and disconnect the fuel lines. Pull out the old cartridge and disconnect the electrical connector at the bottom.

Fit this connector onto the new cartridge and refit it in position. Before installing the fuel lines, if you have a manual pump, fill the fuel filter.

Reassemble everything in position and start the engine to check the correct installation.


Updated on 27 July 2026 by ScegliAuto


Related tutorials

How to Replace the Pollen Filter on a Nissan Micra K13
How to Replace the Pollen Filter on a Nissan Micra K13
Nissan Micra (2010-2017 / K13) In this video, see how to replace the pollen filter on a Nissan Micra K13: access the filter from the passenger footwell, which is extremely simple. …
Where is the OBD port of the Nissan Micra K13 located?
Where is the OBD port of the Nissan Micra K13 located?
Nissan Micra (2010-2017 / K13) If you want to locate the OBD port inside your Nissan Micra K13, all you have to do is follow the steps described in the following guide. First of al…
How do you replace the spark plugs in the Nissan Micra K13?
How do you replace the spark plugs in the Nissan Micra K13?
Nissan Micra (2010-2017 / K13) The candles of a car, in general and not just the specific vehicle, must be replaced in the long run as they inevitably oxidize or even burn out, so …

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos