Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install the Grab Handle on a Nissan Almera Versa

Model: Nissan Almera Versa N17 - Years 2012-2019
Part: Handle

The grab handle is located on the passenger side, mounted on the roof above the door. In the 1960s, it was standard on all vehicles, but now it is practically not found on any car. However, it is very convenient, and here’s how to install it on the Nissan Almera Versa. The original handle costs $25.80 on Amazon. The most challenging part is removing the seals from the door and pulling back some of the roof upholstery to find the exact spot to drill holes for the handle; the screws must fit into the mounts shown by the YouTuber, otherwise the handle won't hold. At this point, once you have taken measurements, drill the holes in the upholstery and screw in the screws provided with the kit. Reinstall the door seal, and the job is complete.

Updated on 27 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Where to Find the Main Fuse Box of the 2019 Nissan Almera Versa
Where to Find the Main Fuse Box of the 2019 Nissan Almera Versa
Nissan Almera Versa (2012-2019 / N17) Your 2019 Nissan Almera Versa has two distinct fuse boxes, but in this guide, we will discover where the main one is located. This box contains a lar…
Replace the Engine Mount on the Nissan Almera Versa
Replace the Engine Mount on the Nissan Almera Versa
Nissan Almera Versa (2012-2019 / N17) Today, you will briefly see the guide on how to remove and replace the engine mount on the Nissan Almera Versa. First, open the hood of your car and …
How to replace the radio antenna of the Nissan Almera Versa
How to replace the radio antenna of the Nissan Almera Versa
Nissan Almera Versa (2012-2019 / N17) The following steps will show us how to disassemble and replace the car radio antenna of the Nissan Almera Versa. First of all, let's move to the bac…

How to Open the Bonnet on the Lancia Y

To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet.

Watch the video!


by ScegliAuto

More videos