Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

DIY Oil Level Measuring Stick for Nissan Rogue

Model: Nissan Rogue T33 - Years: 2021, 2022, 2023, 2024, 2025, 2026
Part: Engine oil

See other generations:
Video tutorial

It may seem strange, but the Nissan Rogue does not have an oil dipstick. It only has a compartment similar to where the dipstick would be, but the dipstick is missing.

You can make one yourself using a 2 mm diameter aluminum welding rod. It needs to be quite long, as shown in the video, and should be secured to the cap with copper wires and a bit of two-part epoxy. You will need to test to check the oil level, which should be measured when hot, to flatten the stick and mark the minimum and maximum levels.

This way, you can check the condition of your oil.


Updated on 29 July 2026 by ScegliAuto


Related tutorials

How to Check the Brake Fluid Level on a Nissan Rogue
How to Check the Brake Fluid Level on a Nissan Rogue
Nissan Rogue (2014-2020 / T32) Checking the brake fluid level on a Nissan Rogue (or Qashqai, which is essentially the same vehicle) is very simple, as the fluid reservoir is clearl…
How to reset the oil light on the 2023 Nissan Rogue
How to reset the oil light on the 2023 Nissan Rogue
Nissan Rogue (2021-2026 / T33) If you want to manually reset the engine oil light of your Nissan Rogue (2023), you must follow all the steps described in our new guide. First, star…
How to Change the Engine Oil of a Nissan Rogue
How to Change the Engine Oil of a Nissan Rogue
Nissan Rogue (2008-2015 / S35) To change the engine oil of the Nissan Rogue, access the underside of the vehicle to loosen the bolt securing the oil drain plug. Once the plug is re…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos