Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil of a Nissan Rogue

Model: Nissan Rogue S35 - Years 2008-2015
Part: Engine oil

To change the engine oil of the Nissan Rogue, access the underside of the vehicle to loosen the bolt securing the oil drain plug. Once the plug is removed, let the used oil flow into a properly positioned container. Then, detach the side cover near the right front wheel, remove the underlying oil filter, and replace it with a new part. After replacing the filter, access the engine bay and top off the oil.

Updated on 13 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the oil light on the 2023 Nissan Rogue
How to reset the oil light on the 2023 Nissan Rogue
Nissan Rogue (2021-2026 / T33) If you want to manually reset the engine oil light of your Nissan Rogue (2023), you must follow all the steps described in our new guide. First, star…
How to Reset the Oil Light on a 2020 Nissan Rogue
How to Reset the Oil Light on a 2020 Nissan Rogue
Nissan Rogue (2014-2020 / T32) If the oil change warning light on your 2020 Nissan Rogue stays illuminated on the dashboard despite a recent oil change, don't worry. You can quickl…
How to Change the Engine Oil in the Nissan Rogue?
How to Change the Engine Oil in the Nissan Rogue?
Nissan Rogue (2021-2026 / T33) The bottom of the engine compartment in the Nissan Rogue is covered by a protective panel that must be removed to access the oil pan. Doing this with…

Other guides you may be interested in

    Frequently Asked Questions

    • Rogue 2014-2020 - Where is the engine oil drain plug located on a Nissan Rogue? Read answer

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos