Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Engine Oil Pan of the Nissan Rogue

Model: Nissan Rogue S35 - Years 2008-2015
Part: Oil pan

Today, you will see in this video tutorial the instructions that will allow you to remove and replace the engine oil pan of the Nissan Rogue. First, lift the vehicle and start draining the engine oil by removing the drain bolt found on the pan; let the old oil drain into a container. Next, remove all the screws on the sides of the pan to take it off; now clean the mounting surface of the pan thoroughly to properly secure the new one. Finally, remember to pour in the new engine oil!

Updated on 9 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the engine air filter of the Nissan Rogue.
How to replace the engine air filter of the Nissan Rogue.
Nissan Rogue (2021-2026 / T33) The procedure necessary to safely and correctly replace the engine air filter of your Nissan Rogue (latest model) is really simple. In the following …
How to Reset the Check Engine Light on a Nissan Rogue?
How to Reset the Check Engine Light on a Nissan Rogue?
Nissan Rogue (2014-2020 / T32) When the check engine light appears on the dashboard of the Nissan Rogue, it means there is a generic malfunction in the vehicle's fuel injection sys…
How to Replace the Spark Plugs on a Nissan Rogue
How to Replace the Spark Plugs on a Nissan Rogue
Nissan Rogue (2014-2020 / T32) This guide will show you how to remove and replace the engine spark plugs on a Nissan Rogue. First, open the hood and disconnect and remove the intak…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos