Guide to Fitting Roof Bars

Model: Nissan Qashqai J10 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Roof rack bars

See other generations:

This video is currently unavailable

To begin the installation, start by removing the plastic seal on the roof. Use spacers to measure for fixing the supports, mark the holes with a permanent marker, and proceed to drill using a depth gauge to avoid piercing the car's headlining and clean the area.

Fill the holes with silicone to prevent water ingress, and screw the supports in place with the appropriate screws and washers. Cut the initially removed seal at the points where the supports have been mounted and reattach the rest of the seal.

Now securely fasten the roof bars and apply the final finishing covers. The car in question is a Nissan Qashqai.

Updated on 2 February 2026 by ScegliAuto

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!

by ScegliAuto

Guide to Fitting Roof Bars

Related tutorials

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

More videos